Freezer & Cold-Chain Label Material

Freezer and cold-chain label material pairs a paper or waterproof film facestock with a deep-freeze adhesive formulated to grab at sub-zero temperatures and keep holding through frost, condensation and thaw cycles. Standard permanent adhesives turn brittle when applied cold, so this construction exists to stop labels popping off chilled and frozen packs.

It is used for frozen food and ice-cream packaging, meat and seafood processing, refrigerated pharmaceutical and vaccine cartons, laboratory sample storage and cold-chain logistics labels.

Specify the application temperature separately from the storage temperature, because adhesives are rated for both, and choose the facestock by moisture exposure — protected thermal or synthetic where packs are wet or scraped. Also confirm print method and liner behaviour on cold applicators. Real cold-room results vary by pack and film — confirm with sample testing.

Request a freezer and cold-chain sample

A label stock with a deep-freeze adhesive that bonds at low and sub-zero temperatures and holds through frozen storage and thawing.

Yes, deep-freeze adhesives are formulated to bond at low application temperatures, though clean, dry surfaces help.

Yes, cold-chain adhesives are designed to hold through frost, condensation and thaw cycles.

Use a waterproof film facestock where condensation is heavy; paper suits drier frozen storage.

Freezer-grade constructions are available on direct thermal, thermal transfer, BOPP and PET facestocks, so you can choose flexo, offset, digital or thermal printing to match your existing printer — confirm your print method and we will pair it with a suitable deep-freeze adhesive.

Freezer and cold-chain constructions are supplied up to 1,600 mm wide, from a single jumbo roll for stock adhesive/facestock combinations, with custom pairings typically from 3,000–5,000 m². Tell us your service temperature and roll width for a fast quote.

Yes, request a free sample of our deep-freeze adhesive on your preferred paper or film facestock, plus the datasheet, so you can test bonding and hold at your actual freezer or chiller temperature before ordering.

Stocked grades start from 1 jumbo roll. Custom constructions or coatings typically start from 3,000–5,000 square meters, depending on complexity.

Permanent, removable, deep-freeze, high-tack or wash-off adhesive (water-based or hot-melt), on white glassine, PET or CCK/kraft liner — matched to your surface and environment.