- Comparison 01BOPP filmVSPET film
BOPP vs PET Label Material: Which Film Facestock Should You Choose?
BOPP is usually the better choice for clear, white or metallized packaging labels where moisture resistance, shelf appearance and cost control matter. PET is the better choice for durable labels exposed to higher heat, chemicals, solvents, abrasion or long service life. For squeeze tubes or soft bottles, compare PE film before choosing either material.
Read the comparison - Comparison 02Semi-gloss coated paperVSWhite BOPP film
Semi-gloss paper vs white BOPP label material
Semi-gloss coated paper is a cost-efficient facestock for dry indoor packaging, while white BOPP is a polypropylene film that resists water, oil and abrasion. Choose semi-gloss for short-life food, carton and logistics labels; choose white BOPP for squeezable containers, chilled packaging and any label exposed to moisture.
Read the comparison - Comparison 03Permanent adhesiveVSRemovable adhesive
Permanent vs removable label adhesive
A permanent pressure-sensitive adhesive builds bond over 24–72 hours and cannot be removed cleanly; a removable adhesive keeps peel low so the label lifts without residue within its stated window. Specify permanent for compliance and lifetime identification, removable for promotions, returnable assets and temporary retail marking.
Read the comparison - Comparison 04Glassine paper linerVSPET film liner
Glassine vs PET release liner
Glassine is a densified paper release liner suited to general flexo converting and hand or moderate-speed application. PET is a thin, dimensionally stable film liner used for high-speed automatic dispensing, fine die-cutting and humid environments, at a higher cost and with a separate recycling route.
Read the comparison - Comparison 05PP synthetic paperVSPE film
PP synthetic paper vs PE film label material
PP synthetic paper is a stiff, matte, tear-resistant facestock that prints like paper but survives water and chemicals. PE film is soft and highly conformable for squeezable HDPE and LDPE bottles. Choose PP for durable tags and flat rigid packs, PE where the container flexes in the hand.
Read the comparison - Comparison 06Acrylic adhesiveVSHotmelt adhesive
Acrylic vs Hotmelt Label Adhesive: Which Should You Choose?
Acrylic adhesive is usually the better starting point for smooth packaging surfaces, clear film labels, long shelf life, UV exposure and cleaner aging. Hotmelt adhesive is usually the better starting point when labels need stronger initial tack on rough cartons, recycled board, textured surfaces, low-energy plastics or difficult substrates. Neither adhesive should be approved without testing on the actual container and service condition.
Read the comparison
Featured procurement resource
Request a quote or a free sample
Send us your facestock, adhesive, liner and roll specification. Low MOQ, OEM/ODM, export to 60+ countries.