Tools & references
- 3 steps
Material Selector
Answer three questions — surface, environment, print method — and get a recommended facestock, adhesive and release liner you can send straight to an RFQ.
Open the selector → - 29 PDFs
Datasheets
Downloadable technical datasheets with caliper, basis weight, adhesive tack, service temperature and liner specification for every stock construction.
Browse datasheets → - 16 guides
Blog
Long-form selection guides on facestock, adhesive chemistry, thermal printing, wash-off testing and sustainable label constructions.
Read the guides → - 6 comparisons
Comparisons
Head-to-head material comparisons with criteria tables and clear “choose this when” guidance for the decisions converters make most often.
Compare materials → - 50 terms
Glossary
Plain-English definitions of label industry terms — facestock, glassine, dyne level, wash-off, GSM — each linked to the matching material page.
Open the glossary →
Latest technical guides
All guides →Quality
Label Perforations: Cut-to-Tie Ratio, Tear-Off and Liner Integrity
Specify label perforations by cut length, tie length, direction and the layers being cut — TPI alone does not establish tear-off behavior.
Troubleshooting
Why Labels Bubble, Wrinkle and Tunnel on Bottles and Containers
Bubbles, wrinkles and tunnels look alike but have different causes: trapped air at application, gas from the container, a label that cannot follow the shape, or stress built into the roll.
Troubleshooting
Why Labels Fail to Dispense and Liners Break on High-Speed Applicators
Labels that stay on the liner, fly past the product, or a liner that snaps mid-run usually trace back to release, die-strike, liner choice, tension or peel-plate setup.
Featured procurement resource
Head-to-head comparisons
All comparisons →BOPP vs PET Label Material: Which Film Facestock Should You Choose?
BOPP film
Biaxially oriented polypropylene facestock for clear, white and metallized packaging labels.PET film
Polyester facestock for durable labels facing heat, chemicals, abrasion or long service life.Semi-gloss paper vs white BOPP label material
Semi-gloss coated paper
Coated woodfree paper facestock for dry, indoor, cost-driven applications.White BOPP film
Biaxially oriented polypropylene film for wet, oily or squeeze-pack use.Permanent vs removable label adhesive
Permanent adhesive
General-purpose or high-tack acrylic and hot-melt systems for lifetime bonds.Removable adhesive
Low-build acrylic systems designed to release cleanly within a service window.Glassine vs PET release liner
Glassine paper liner
Densified, calendered paper liner at 50–65 gsm — the general-purpose default.PET film liner
Polyester film liner at 23–36 µm for speed, precision and humidity stability.PP synthetic paper vs PE film label material
PP synthetic paper
Stiff, matte, paper-look polypropylene sheet for durable identification.PE film
Soft conformable polyethylene film matched to squeezable containers.Acrylic vs Hotmelt Label Adhesive: Which Should You Choose?
Acrylic adhesive
Acrylic pressure-sensitive adhesive for smooth packaging surfaces, film labels and cleaner long-term aging.Hotmelt adhesive
Rubber-based hot-melt adhesive for strong initial tack on rough cartons, recycled board and difficult surfaces.
Start with the vocabulary
Full glossary →Need a specification we haven’t published?
Send us the container, the filling and service conditions and the press you print on. Our technical team returns a recommended construction, the datasheet and a free A4 sample set.
Request a quote or a free sample
Send us your facestock, adhesive, liner and roll specification. Low MOQ, OEM/ODM, export to 60+ countries.